Setup For SpectrumDigital DSK Emulator Drivers

We assume you have Code Composer Studio v3.2, installed at c:\CCStudio_v3.2. Make sure your PATH environment variable contains c:\CCStudio_v3.2\cc\bin, where CCS driver DLLs are located. Make sure c:\fadata\jevm\bin is also in the PATH. Make sure the environment variable JEVM_DIR= c:/fadata/jevm (or your JEVM installation folder) and environment variable TI_DIR=c:/CCStudio_v3.2 (or your CCS folder).

DSK5510 Setup

Board Data File

Put in c:\fadata\jevm\bin folder a file named dsk5510.dat with the following contents:

# config version=3.5
@ TMS320C5500_0 family=tms320c55xx
@ BYPASS_0 family=bypass irbits=8
$ sdopts
emuportaddr=0x540
$ /
$ sepk
pod_drvr=xds510.dll
$ /
# /

JEVM5510 Batch File

Put in c:\fadata\jevm\bin folder a file named jevm5510.bat with the following contents:

 @JevmLoad.exe -f %JEVM_DIR%/bin/dsk5510.dat -ncpu0 -d %TI_DIR%/drivers/sdgo5510dsk.dvr
 -r -c0x800:2=0x0221 -c0x801:2=0xffff -c0x803:2=0x3fff -c0x804:2=0x5fff 
 -c0x805:2=0x5fff -c0x806:2=0x3fff -c0x807:2=0x5fff -c0x808:2=0x5fff 
 -c0x809:2=0x1050 -c0x80a:2=0x0050 -c0x80b:2=0x0050 -c0x80c:2=0x1050 
 -c0x80d:2=0x0050 -c0x80e:2=0x0050 -c0x80f:2=0x2b11 -c0x810:2=0x0578 
 -c0x811:2=0x0fff -c0x813:2=0x0535 -c0x812:2=0x0000 
 -q -i %JEVM_DIR%/out/jevm5510.out %1 %2 %3 %4 %5 %6 %7 %8 %9

This file is used to load and run JEVM passing command line arguments to it.

JEVM5510di Batch File

Put in c:\fadata\jevm\bin folder a file named jevm5510di.bat with the following contents:

 @JevmLoad.exe -f %JEVM_DIR%/bin/dsk5510.dat -ncpu0 -d %TI_DIR%/drivers/sdgo5510dsk.dvr -r 
 -c0x800:2=0x0221 -c0x801:2=0xffff -c0x803:2=0x3fff -c0x804:2=0x5fff -c0x805:2=0x5fff 
 -c0x806:2=0x3fff -c0x807:2=0x5fff -c0x808:2=0x5fff -c0x809:2=0x1050 -c0x80a:2=0x0050 
 -c0x80b:2=0x0050 -c0x80c:2=0x1050 -c0x80d:2=0x0050 -c0x80e:2=0x0050 -c0x80f:2=0x2b11 
 -c0x810:2=0x0578 -c0x811:2=0x0fff -c0x813:2=0x0535 -c0x812:2=0x0000 
 -q -i %JEVM_DIR%/out/jevm5510di.out %1 %2 %3 %4 %5 %6 %7 %8 %9

This file is used to load and run JEVM build that supports Java Debug Interface passing command line arguments to it.

DSK6713 Setup

Board Data File

Put in c:\fadata\jevm\bin folder a file named dsk6713.dat with the following contents:

# config version=3.5
@ TMS320C6710_0 family=tms320c671x
$ sdopts
emuportaddr=0x540
$ /
$ sepk
pod_drvr=xds510.dll
$ /
# /

JEVM6713 Batch File

Put in c:\fadata\jevm\bin folder a file named jevm6713.bat with the following contents:

 @JevmLoad.exe -f %JEVM_DIR%/bin/dsk6713.dat -ncpu0 -d %TI_DIR%/drivers/sdgo6713dsk.dvr -r 
 -c0x01800000=0x00000078 -c0x01800008=0xffffbf33 -c0x018000004=0x02208802 
 -c0x01800010=0x22a28a22 -c0x01800014=0x22a28a22 -c0x01800018=0x47115000 
 -c0x0180001c=0x00000578 -c0x01800020=0x000a8529 
 -q -i %JEVM_DIR%/out/jevm6713.out %1 %2 %3 %4 %5 %6 %7 %8 %9

This file is used to load and run JEVM passing command line arguments to it.

JEVM5510di Batch File

Put in c:\fadata\jevm\bin folder a file named jevm6713di.bat with the following contents:

 @JevmLoad.exe -f %JEVM_DIR%/bin/dsk6713.dat -ncpu0 -d %TI_DIR%/drivers/sdgo6713dsk.dvr -r 
 -c0x01800000=0x00000078 -c0x01800008=0xffffbf33 -c0x018000004=0x02208802 
 -c0x01800010=0x22a28a22 -c0x01800014=0x22a28a22 -c0x01800018=0x47115000 
 -c0x0180001c=0x00000578 -c0x01800020=0x000a8529 
 -q -i %JEVM_DIR%/out/jevm6713di.out %1 %2 %3 %4 %5 %6 %7 %8 %9

This file is used to load and run JEVM build that supports Java Debug Interface passing command line arguments to it.

DSK6416 Setup

Board Data File

Put in c:\fadata\jevm\bin folder a file named dsk6416.dat with the following contents:

# config version=3.5
@ TMS320C6400_0 family=tms320c641x
$ sdopts
emuportaddr=0x540
$ /
$ sepk
pod_drvr=xds510.dll
$ /
# /

JEVM6416 Batch File

Put in c:\fadata\jevm\bin folder a file named jevm6416.bat with the following contents:

 @JevmLoad.exe -f %JEVM_DIR%/bin/dsk6416.dat -ncpu0 -d %TI_DIR%/drivers/sdgo6416dsk_11.dvr 
 -r -c0x01800000=0x00012070 -c0x01800008=0xffffffd3 -c0x01800010=0x22a28a22 
 -c0x01800014=0x22a28a22 -c0x01800018=0x47115000 -c0x0180001c=0x00000618 
 -c0x01800020=0x000a8529 -c0x01A80000=0x00002070 -c0x01A80008=0x22008800 
 -c0x01A80004=0x22008800 -q -i %JEVM_DIR%/out/jevm6416.out %1 %2 %3 %4 %5 %6 %7 %8 %9

This file is used to load and run JEVM passing command line arguments to it.

JEVM5510di Batch File

Put in c:\fadata\jevm\bin folder a file named jevm6416di.bat with the following contents:

@JevmLoad.exe -f %JEVM_DIR%/bin/dsk6416.dat -ncpu0 -d %TI_DIR%/drivers/sdgo6416dsk_11.dvr 
-r -c0x01800000=0x00012070 -c0x01800008=0xffffffd3 -c0x01800010=0x22a28a22 
-c0x01800014=0x22a28a22 -c0x01800018=0x47115000 -c0x0180001c=0x00000618 
-c0x01800020=0x000a8529 -c0x01A80000=0x00002070 -c0x01A80008=0x22008800 
-c0x01A80004=0x22008800 -q -i %JEVM_DIR%/out/jevm6416di.out %1 %2 %3 %4 %5 %6 %7 %8 %9

This file is used to load and run JEVM build that supports Java Debug Interface passing command line arguments to it.